Kamfaninmu kwanan nan ya kammala oda don saitin 5000 napanel haske hawa brackets.Daga sarrafa albarkatun kasa kamar yankan, naushi, chamfering, zuwa feshi foda, muna bin ka'idodin ingancin abokin cinikinmu sosai.Kafin marufi, ingantattun ma'aikatanmu za su bincika kowane cikakkun bayanai na samfurin, kuma ba a yarda da nakasu, karce, tabo baƙar fata, feshin foda da sauran lahani.Tunda abokan ciniki suna da nasu marufi na musamman, dole ne su yi amfani da tambarin nasu, tambura da takaddun koyarwa.Dangane da marufi, muna amfani da masu kariyar kusurwa don sauƙi na samfurin, don hana nakasar sashi yayin sufuri ko jigilar kaya.

Kuna buƙatar samun aSurface Dutsen KitkoKit ɗin Hawan da aka Ragedon LED Panel.

Hanyoyin shigarwa guda hudu na fitilun panel LED

1. Dakatarwa, Gyara wayoyi huɗu na tushe na waya mai dakatarwa zuwa rufi, sa'an nan kuma haɗa fitilun panel zuwa na'urorin dakatarwa guda huɗu, kuma daidaita tsayin da aka zaɓa bisa ga abubuwan da kake so.

2. Recessed Dutsen, da farko auna girman firam ɗin da aka ajiye, sa'an nan kuma zana kuma yanke shi a kan rufi tare da alkalami, kuma shigar da firam ɗin juyawa don shigar da hasken panel.

3. Surface Dutsen, kai tsaye shigar da firam ɗin da aka ɗora na hasken panel a kan rufin wurin da ake so, sa'an nan kuma shigar da hasken panel.

4. Abun ciki, da farko shigar da takarda karfen tsagi a kan rufin, sa'an nan kuma gyara ƴan protruding brackets a baya na LED panel haske, sa'an nan kuma sanya panel haske a ciki, sabõda haka, da bracket da sheet karfe tsagi a kan rufin daidai. zaka iya gyarawa akan rufin.